A »To safely jump-start a vehicle, first park the helper car close and turn off both engines. Connect the red positive cable to the dead battery's positive terminal and the other end to the good battery. Attach the black negative cable to the good battery's negative terminal and the other end to a metal ground on the dead car. Start the helper car, then the dead car. Remove cables in reverse order.

A »To jump-start a vehicle safely, first ensure both vehicles are parked on level ground with the engines turned off. Connect the positive (red) jumper cable to the dead battery's positive terminal, then to the good battery's positive terminal. Next, connect the negative (black) cable to the good battery's negative terminal and the other end to a metal surface on the dead vehicle's engine or frame. Start the working vehicle's engine, then the dead one. Remove the cables in reverse order.

A »To jump-start a vehicle safely, park cars close without touching. Turn off both ignitions. Connect red clamp to dead battery's positive, then to donor battery's positive. Attach black clamp to donor battery's negative, then to unpainted metal on dead car. Start donor car, then dead car. Once started, remove clamps in reverse order. Ensure cables don't touch until disconnected. Drive the revived car for at least 20 minutes to recharge.

A »To jump-start a vehicle safely, ensure both vehicles are parked on level ground with engines off. Connect the positive jumper cable to the dead battery's positive terminal, then to the good battery's positive terminal. Next, connect the negative cable to the good battery's negative terminal and the dead vehicle's engine or frame. Start the working vehicle's engine, then the dead vehicle. Remove cables in reverse order.

A »To safely jump-start a vehicle, first park the working car close, turn off both vehicles, and connect the red clamp to the dead battery's positive terminal. Attach the other red clamp to the charged battery's positive terminal, then connect the black clamp to the charged battery's negative terminal and the other black clamp to an unpainted metal surface on the dead car. Start the working car, then the dead one. Remove clamps in reverse order.

A »To jump-start a vehicle safely, ensure both vehicles are parked on level ground with engines off. Connect the positive (red) jumper cable to the dead battery's positive terminal, then to the good battery's positive terminal. Connect the negative (black) cable to the good battery's negative terminal and the dead vehicle's engine or frame. Start the working vehicle, then the dead one. Remove cables in reverse order.

A »To safely jump-start a vehicle, first park the working car close, but not touching, the dead car. Connect the red positive cable to both batteries' positive terminals, then the black negative cable to the working battery's negative terminal and the dead car's unpainted metal surface. Start the working car, wait a few minutes, and then start the dead car. Once started, remove the cables in reverse order and keep the car running.

A »To jump-start a vehicle safely, first ensure both vehicles are parked on level ground with the engines turned off. Connect the positive (red) jumper cable to the dead battery's positive terminal, then to the good battery's positive terminal. Next, connect the negative (black) cable to the good battery's negative terminal and the other end to a metal surface on the dead vehicle's engine or frame. Start the working vehicle's engine and let it run for a few minutes before attempting to start the dead vehicle.

A »To jump-start a vehicle safely, park both cars close, turn off engines, and connect red clamp to the dead battery's positive terminal. Attach the other red clamp to the good battery's positive terminal. Connect the black clamp to the good battery's negative terminal, and the other black clamp to an unpainted metal surface on the dead car. Start the working car, then the dead one. Remove clamps in reverse order.

A »To jump-start a vehicle safely, ensure both vehicles are parked on level ground with engines off. Connect the positive jumper cable to the dead battery's positive terminal, then to the good battery's positive terminal. Next, connect the negative cable to the good battery's negative terminal and the dead vehicle's engine or frame. Start the working vehicle's engine, then the dead vehicle's. Remove cables in reverse order.