A »To measure voltage using a multimeter, set it to the voltage function (DC or AC), connect the leads to the correct terminals, and touch the probes to the circuit or device you're testing. Ensure the multimeter is set to a higher voltage range than expected to avoid damage. Read the voltage on the display.

A »To measure voltage with a multimeter, first set the dial to the appropriate voltage type (AC or DC) and range. Connect the black probe to the COM terminal and the red probe to the VΩmA terminal. Place the probes on the circuit or component: the black on the negative side, and the red on the positive side. Read the voltage on the display.

A »To measure voltage using a multimeter, set the device to the voltage measurement function (DC or AC), connect the leads to the correct terminals, and touch the probes to the circuit or component. Ensure the multimeter is set to a higher voltage range than the expected voltage to avoid damage. Read the voltage value displayed on the multimeter's screen.

A »To measure voltage using a multimeter, first set the multimeter to the voltage mode, usually marked with a "V." Connect the black probe to the COM port and the red probe to the VΩ port. Touch the probes to the two points where you want to measure voltage—red to positive, black to negative. Read the display for the voltage value. Always ensure you're measuring within the multimeter's voltage range.

A »To measure voltage using a multimeter, set the dial to the voltage setting (DC or AC), connect the black lead to a ground or common point, and touch the red lead to the point you want to measure. Ensure the multimeter is set to the correct voltage range and read the display for the measured voltage.

A »To measure voltage with a multimeter, first set the dial to the appropriate AC or DC voltage range. Insert the black probe into the COM port and the red probe into the VΩmA port. Touch the probes to the circuit's test points; the black probe to the negative or ground, and the red to the positive. Read the voltage value displayed. Always ensure the multimeter is appropriately rated for your specific measurement.

A »To measure voltage using a multimeter, set the dial to the voltage setting (DC or AC), connect the black lead to a ground or common point, and touch the red lead to the point you want to measure. Ensure the multimeter is set to the correct range and take the reading from the display.

A »To measure voltage with a multimeter, first set the dial to the appropriate voltage setting (AC or DC). Insert the black probe into the COM port and the red probe into the VΩ port. Touch the probes to the circuit's terminals, red to positive and black to negative. Read the voltage value displayed on the screen. Ensure the multimeter's range covers the expected voltage to avoid incorrect readings.

A »To measure voltage using a multimeter, set the device to the voltage measurement function (DC or AC), connect the leads to the correct terminals, and touch the probes to the circuit or component. Ensure the multimeter is set to a higher voltage range than the expected measurement to avoid damage. Read the voltage value displayed on the multimeter's screen.

A »To measure voltage with a multimeter, first, set the dial to the desired voltage type (AC or DC). Insert the black probe into the COM port and the red probe into the VΩ port. Touch the probes to the circuit's corresponding points: the red to the positive and the black to the negative or ground. The display will show the voltage reading. Always ensure your multimeter is properly set to avoid damage.